EI-1003C Computer Servo control UTM (100N-20kN) is designed by mechanical-electrical integration,
composition of the force-measuring sensor, transmitter, microprocessor, mechanism of load drive , computer and color inkjet
printer.High-precision electronic motor can be set to five-speed, the components are connected by plug-way, Floor-standing
models.It is taken account of modern industrial design and ergonomics in modeling and coating.It can be tested all the materials
in stretch, compression, bending, shear, embedded relay, peeling, tearing, crack, etc,such as rubber,plastics, leather, metal, nylon
wire, fabric, paper, aerospace, packaging, construction, petrochemical, electrical, vehicle, etc
The implementation of standards and standard configuration
1. GB/T4689.20-1996 measuring fastness of leather’s adhesion
2. QB/T2710-2005 measuring leather’s expansion and the rate of elongation
3. QB/T2711-2005 measuring tear force of leather
4. QB/T2712-2005 measuring leather’s strength and stretch of spherical crack test
6. TAPPI T-494, ISO 1924, ISO12625-4, AS/NZ1301.448s, BS EN ISO1924-2, CPPA D34, DIN 53112, SCAN P38
7. Breaking strength (sample method) GB/TT3923.1, ISO13934.1, ASTM D5035
8. (Grab method) GB/T3923.2, ISO13934.2, ASTM D5034
9. Tear strength (tongue-shaped tear) GB/T3917.2, ISO13937.2, ASTM D2261
10. (Trapezoidal tear) GB/T3912.3, ISO9074.4, ASTM D5587
A. High-precision sensor 1ton from U.S.A. Accurate Forces within ± 0.5%.
B. High-precision 24 bits A / D, sampling frequency 200Hz
C. Power System: Panasonic AC Servo Motor + Driver + CAVEX + precision ball screw
D. Control System: it is more precise using Pulse Command control modem, the range in speed control is 0.01 ~ 250 mm / min.
The board of iron can be adjust to fast and slow by the control board. it is automatically saved after testing .
E. Data transmission: RS232 Transfer
F. Display: windowsXP test software.
G. easy to control five speed and calibration system.
H. test software can precision control in position, speed, rate of load force and rate of stress, satisfy the different requirements of test.
I. Test space: Testing width is about 400 mm (standard), moving space of active iron 1000mm (excluding fixtures)
J. displacement: coder 2500 P / R, increase four-time accuracy. adopt Japanese Lejing coder that has strong anti-jamming
capability, displacement resolution 0.001mm.Small deformation: Metal extensometers, parsing 0.001mm.
K. Safe equipment : the system would shut down if overload or over-trip
A. function of standard modular: provide users with the necessary applications to the test, covering GB, ASTM, DIN, JIS, BS ...
and other test standard specification.
B. being test product information: provide users with the data to set about the product, one time to input and re-use permanently.
For improving the accuracy, the data can be corrected by the formula automatically.
C. Dual-Report Editor: provide user with the reported format that user choose (testing program add EXCEL reported format, Extend
the previous single pattern of statements)
D. length unit, force unit and showing the data can exchange, force unit T, Kg, N, KN, g, lb, unit of length mm, cm, inch.
E. auto-optimization of graphic scale, display the best measurment of graphics. It can test the exchange in graphics. It has the
load - displacement, load - time, displacement - time, stress - strain load -2 points extending maps, and lots of graph compared.
F. Test results can be output in EXCEL format.
G. the result of test can be automatically preserved or manual preserved, test can automatically calculate the most strength, up
and down yield strength, loop method, best method, non-proportional extended strength, tensile strength, compressive strength,
tensile strength at any point, constant load extension, elastic modulus, rate of elongation, peel range of maximum, minimum,
average, force, total energy, bending modulus, x% load in break displacement, load X% in break displacement, and so on . the
test data can be stored in any disk.
H. Software has a capability that can output the before data.
A. warranted book within one-year and operating instructions.
B. a group of fixture
C. testing software for tensile machine.
D. a set of brand computer, color printer
4. items can be tested
Common items: ( display data and calculation )
* tensile stress * tensile strength
* tensile strength * rate of elongation at break
* fixed stress * rate of stress at break
* stress strength *tear strength
* the value of force at any point *rate of elongation at any point
* pull-out strength * force of adhesion and value of peak
A.load cell:5KN or 1ton option
B.resolution of force:1/200000
C.accuray of force:≤0.5%
D.Power magnification: 7 automatic switching
F.accuracy of displacement:≤0.5%
G.resolution of extensometer:1/1000
H.accuracy of extensometer:≤0.5%
I.Range of speed:0.01-250mm/min(according to the needs of customer)
J.effective displacement:800mm(excluding fixture)
K.testing width: 400mm
L.power supply : 220V
N.machine size : about 120×75×180cm. (lenght ×width×height)
O. machine weight : about 500 kg